Claim Support

Claim Denial Management: How to Prevent, Work and Appeal Denials

A practical denial management process for medical practices: reading denial codes, fixing root causes, writing appeals and tracking deadlines.

12 min read

Denial management is the process of finding out why a payer did not pay a claim, fixing what can be fixed, appealing what the payer got wrong and changing the process so the same denial does not happen again. Practices that work denials consistently recover revenue that would otherwise be written off. Practices that also prevent denials spend less time on rework in the first place.

This guide sets out a working denial management process: how to read denials, how to sort them, how to decide what to do with each one, how to write an appeal that gets read, and how to turn denial data into prevention.

Rejections, denials and underpayments are different problems

Before building a process, separate three problems that are often lumped together.

  • Rejections happen before adjudication. The clearinghouse or payer front end rejects the claim for missing or invalid data, such as a wrong member ID, an invalid NPI or a missing required field. The claim was never processed. It needs to be corrected and resubmitted, and quickly, because the timely filing clock keeps running.
  • Denials happen after adjudication. The payer processed the claim and decided not to pay all or part of it. A denial can be at the claim level or on individual lines.
  • Underpayments are paid claims where the payment is lower than the contract or fee schedule allows. They do not appear as denials, so they are easy to miss.

Each needs its own queue and its own owner. When they share one undifferentiated work list, rejections get worked late and underpayments are not worked at all.

How to read a denial

Every denial on an electronic remittance advice (835) carries codes that explain it.

Group codes

Group codes show who is responsible for the adjusted amount:

  • CO (contractual obligation): the provider is responsible and generally cannot bill the patient. Contractual write-offs and many denials use CO.
  • PR (patient responsibility): the amount can be billed to the patient, such as deductible, coinsurance or copay.
  • OA (other adjustment): used when neither CO nor PR applies.
  • PI (payer initiated reduction): used by some payers for reductions they initiate.

Claim adjustment reason codes

CARCs explain why the adjustment happened. Common categories include eligibility, coverage, authorization, timely filing, duplicate claims, bundling, medical necessity, coordination of benefits and missing information. The codes are standardized and maintained by a national code committee, and the current list is published by X12.

Remittance advice remark codes

RARCs add detail to the CARC, such as which information was missing or which policy was applied. Reading the CARC without the RARC often leads to the wrong fix.

Payer correspondence

Some denials come with a letter, a portal message or a request for records. Medical necessity denials, audits and records requests in particular should be read in full, not just coded.

Sorting denials into workable categories

Grouping denials by root cause makes them easier to work and easier to prevent. A practical set of categories:

Category Typical causes Usual fix
Eligibility and registration Inactive coverage, wrong member ID, wrong payer, subscriber mismatch Verify coverage, correct demographics, resubmit or bill correct payer
Coordination of benefits Other coverage on file, primary payer unknown Update COB with patient and payer, bill primary first
Authorization and referral No authorization, expired authorization, wrong code or units authorized Obtain retro authorization if allowed, appeal with evidence, fix scheduling process
Coding and bundling NCCI edits, missing or wrong modifier, invalid code combination Review documentation, correct claim, appeal if coding was correct
Medical necessity Diagnosis does not support service per payer policy Review policy and documentation, appeal with records
Timely filing Claim submitted after payer deadline Appeal with proof of timely submission if available
Duplicate Claim already processed, or appears duplicate without modifier Check history, add modifier or explain distinct service
Missing information Records requested, itemized bill, accident details Send requested information promptly
Credentialing and enrollment Provider not enrolled or not linked to group Fix enrollment, then reprocess or appeal
Non-covered service Excluded benefit Bill patient if properly notified, otherwise write off

A step-by-step denial workflow

Step 1: Capture every denial

Denials must not disappear into adjustment postings. Payment posting should flag every denied line into a work queue, with the CARC, RARC, payer, amount and date.

Step 2: Triage daily

Review new denials every business day. Sort by deadline, amount and category. Denials with short appeal windows or high balances go first. Simple fixes, such as a missing modifier or updated insurance, should be done the same day.

Step 3: Investigate

For each denial, confirm the facts. Check eligibility on the date of service, the authorization record, the documentation, the codes billed and the payer’s policy. Check whether the claim was billed to the right payer and under the right provider. Many denials have a simple cause once someone looks.

Step 4: Decide the action

Choose one of these outcomes:

  1. Corrected claim when the practice made the error and the payer allows correction, using the payer’s frequency code or corrected claim process.
  2. Reconsideration or reopening for clerical errors where the payer offers a simpler process than a formal appeal.
  3. Formal appeal when the practice believes the payer’s decision is wrong.
  4. Bill another payer when the denial shows another payer is primary.
  5. Transfer to patient responsibility when the patient is responsible under the plan and, where required, was properly notified.
  6. Write off with a documented reason, when no other path is appropriate.

Step 5: Act and document

Make the correction or send the appeal, then record what was done, when, and the reference number. Without notes, follow-up becomes guesswork.

Step 6: Follow up

Set a follow-up date for every open item. Payers do not always respond on time, and appeals can be lost. Check status through the portal or by phone, and escalate when needed.

Step 7: Close and learn

When the denial is resolved, record the outcome. Over time, outcome data shows which appeals succeed with which payers and which denials are better prevented than fought.

Writing appeals that get read

A clear, complete appeal is more likely to be overturned than a long or vague one. A good appeal letter includes:

  • Patient name, member ID, claim number, date of service and billed amount.
  • The specific denial reason and code being appealed.
  • A short statement of why the denial is incorrect.
  • References to the payer’s own policy, the provider contract or applicable coverage criteria where relevant.
  • Supporting documentation: office notes, operative reports, test results, authorization records or proof of timely filing.
  • A clear request: reprocess and pay the claim.
  • Contact information for follow-up.

Keep the letter factual and focused. Highlight the part of the record that answers the denial reason. Reviewers handle many appeals, and a letter that points them straight to the relevant evidence helps.

Levels of appeal

Most payers have more than one level of appeal. Medicare has a defined multi-level appeals process that starts with redetermination by the Medicare Administrative Contractor and can proceed through reconsideration by a qualified independent contractor and further levels. Commercial plans typically offer internal appeals and, in some cases, external review. Workers’ compensation and auto carriers follow state-specific dispute processes. Know the levels for each major payer and track deadlines for each.

A simple appeal letter outline

The structure below works for most first-level commercial appeals. Adapt it to the payer’s required form where one exists, since some payers will not accept a letter in place of their form.

  1. Header: practice name, address, NPI and tax ID; payer name and appeals address; date.
  2. Reference block: patient name, date of birth, member ID, claim number, date of service, CPT/HCPCS codes at issue and the denial code.
  3. Opening: one sentence stating that you are requesting reconsideration of the denial and payment of the claim.
  4. Facts: two or three sentences describing the service and why it was provided.
  5. Argument: why the denial does not apply, with a reference to the specific policy criteria, contract term or coding rule and the page of the record that meets it.
  6. Enclosures: a numbered list of what is attached.
  7. Request and contact: a clear request to reprocess the claim, and a direct contact for questions.

Keep a library of letters that worked, organized by payer and denial reason. Reusing a proven structure saves time, but each letter still needs to address the facts of the specific claim.

Medical necessity denials and peer-to-peer reviews

Medical necessity denials deserve special handling because they depend on clinical judgment, not clerical fixes.

Start by obtaining the payer’s coverage policy that was applied. Many payers publish medical and reimbursement policies on their provider websites, and Medicare publishes national and local coverage determinations. Compare the policy criteria line by line with the documentation.

If the documentation meets the criteria, the appeal should say so directly and point to where. If it does not, ask whether the record is incomplete. Sometimes the supporting information exists in another note, a test result or a referral letter that was not sent with the claim.

For some denials, particularly those involving authorization, a payer may offer a peer-to-peer discussion between the treating provider and the payer’s medical reviewer. These conversations are often time-limited. When one is offered, the billing team should schedule it quickly, brief the provider on the policy criteria and the denial reason, and have the relevant records ready.

After the outcome, update your authorization matrix or documentation guidance so the next request for the same service is stronger from the start.

Preventing denials at the source

Working denials recovers revenue. Preventing them saves the cost of working them. Prevention follows from analysis.

Analyze denials monthly

Run a monthly report of denials by reason category, payer, provider, location and procedure. Look for the top five categories by count and by dollars. Those are your priorities.

Fix the front end

For many practices, the largest preventable categories are eligibility, registration and authorization. Practical fixes:

  • Verify eligibility before every scheduled visit and again for recurring patients at set intervals. See our benefits verification service.
  • Ask about other coverage and accident or work injury at every registration.
  • Keep an authorization matrix for top payers and procedures, and check it at scheduling. See our pre-authorization service.
  • Track authorization units and expiration dates against the schedule.

Improve coding and documentation

  • Give providers short, specific feedback on documentation gaps tied to actual denials.
  • Keep scrubber edits current with NCCI updates and payer policy changes.
  • Review modifier use, particularly modifiers that bypass bundling edits.
  • Code diagnoses to the specificity the documentation supports.

Keep enrollment current

Track enrollment status, revalidation dates and CAQH attestation for every provider with every payer. A lapsed enrollment can cause denials for every visit that provider sees under that plan. See our credentialing service.

Submit clean claims

Our guide to clean claim submission covers the claim-level checks that stop avoidable denials before they reach the payer.

Specialty denial patterns

Denial patterns differ by specialty. Some examples:

  • Cardiology: diagnostic testing such as imaging and stress testing often depends on medical necessity criteria and authorization. Professional and technical component billing must match the setting. See cardiology.
  • Orthopedics: global surgical periods, multiple procedure reductions and injury claims that belong to a workers’ compensation or auto carrier are frequent denial sources. See orthopedics.
  • Oncology: drug units, NDC reporting where required, infusion hierarchy and authorization for high-cost therapies need careful attention. See oncology.
  • Psychiatry and neurology: time documentation, add-on codes and behavioral health carve-outs to a separate managed behavioral health organization can cause denials if the claim goes to the wrong entity.
  • Dermatology: procedures billed on the same day as an evaluation and management service need documentation of a significant, separately identifiable service when a modifier is used.

Underpayments: the denials nobody sees

Underpayments deserve a short section of their own because they rarely show up in denial reports. The claim is marked paid, the payment posts, and the shortfall is absorbed as a contractual adjustment.

Common causes include fee schedules loaded incorrectly in the payer’s system, multiple procedure or bilateral reductions applied incorrectly, modifiers that reduce payment when they should not, and payment at an out-of-date rate after a contract renewal.

To find underpayments, load your contracted rates into the practice management system, or keep them in a reference file, and compare expected and actual payment on every remittance. Start with your highest-volume codes and largest payers. When you find a pattern, raise it with the payer’s provider relations contact and request reprocessing of affected claims within the contract’s dispute window.

Tracking deadlines

Missing a deadline turns a recoverable denial into a write-off. Keep a deadline reference for each major payer that includes:

  • Timely filing for original claims.
  • Deadlines for corrected claims.
  • Deadlines for each level of appeal.
  • Response time the payer commits to, so you know when to follow up.

Medicare’s general rule is that claims must be filed within 12 months of the date of service, and Medicare appeals have their own timeframes for each level. Commercial plans, Medicaid programs and other payers set their own limits, and provider contracts may differ from the payer’s general policy. Check each payer’s current provider manual and your contracts.

Metrics for a denial management program

Measure the program so you can see whether it works:

  • Denial rate: denied claims or lines as a share of claims or lines submitted, tracked by payer and reason.
  • Denials worked: share of denials with action taken within a set number of days.
  • Overturn rate: share of appealed denials that are paid, by payer and reason.
  • Recovered dollars: amount collected on denied claims.
  • Repeat denials: the same denial reason recurring for the same payer and service, which signals an unfixed root cause.
  • Write-offs by reason: denials closed without payment, with the reason documented.

Compare against your own history. Benchmarks published elsewhere rarely match your specialty and payer mix closely enough to be useful targets.

A denial management checklist

  1. Every denied line is captured in a work queue at posting, not hidden in adjustments.
  2. Rejections, denials and underpayments are tracked in separate queues with named owners.
  3. New denials are triaged every business day by deadline, amount and category.
  4. Each denial has a documented decision: correct, appeal, rebill, transfer or write off.
  5. Appeal letters are specific, cite the denial reason and include supporting records.
  6. Follow-up dates are set and worked for every open appeal.
  7. Deadlines for filing and appeals are tracked by payer.
  8. Denials are reported monthly by reason, payer, provider and procedure.
  9. The top denial categories have an assigned prevention project with an owner.
  10. Results are reviewed with front desk, providers and billing staff together.

When to bring in outside help

If denials are piling up faster than your team can work them, if old A/R is approaching timely filing limits, or if the same denials repeat month after month, an outside team can help clear the backlog and set up prevention. Look for a partner that reports at the claim level, explains root causes and works with your staff on fixes, not just on appeals.

For a broader look at how denials fit into the full process, see revenue cycle management explained.

How Expert MBS handles denials

Expert MBS works denials and aged claims through our claim support service and as part of full medical billing. We read each denial, correct or appeal it, track it to resolution and report the patterns we see, so your team can fix the causes upstream.

If denials are taking up more of your staff’s time than they should, request a consultation and we will review a sample of your claims.

Questions about Claim Denial Management: How to Prevent, Work and Appeal Denials

What is the difference between a rejected claim and a denied claim?

A rejected claim fails clearinghouse or payer front-end edits and is never adjudicated, so it must be corrected and resubmitted. A denied claim was adjudicated, but some or all of the charges were refused. Denials are corrected, appealed or resolved according to the reason.

What are CARC and RARC codes?

Claim adjustment reason codes (CARCs) explain why a claim or line was paid differently from what was billed. Remittance advice remark codes (RARCs) add detail. Group codes such as CO, PR and OA show who is financially responsible for the adjustment.

How long do we have to appeal a denied claim?

It depends on the payer and the plan. Medicare, Medicaid programs, commercial plans and workers' compensation carriers each set their own timelines, and contracts can change them. Track the appeal deadline from the date on the remittance or denial notice for every payer.

Should every denial be appealed?

No. Some denials are best fixed with a corrected claim, some belong to another payer or the patient, and some are not worth pursuing. Each denial should get a deliberate decision based on the reason, the amount and the chance of success.

What is the most effective way to reduce denials?

Group denials by reason and payer, find the step in the process where each type starts, and fix that step. Most practices find that front-end issues such as eligibility, registration and authorization account for a large share of preventable denials.

Related articles

Talk to us about your practice

A free consultation to review your billing workflow and where support would help.